Strip Heaters

Finned Strip Heaters

DT Heaters & Controls fabricates commercial and industrial electric heating and control systems to meet your application requirements.   DT electric Strip Heaters feature a heating element, protective sleeve, and mounting hardware to clamp or bolt to objects of various materials. Our strip heaters are an excellent choice for surface contact heating where even heat distribution over broad surface area is desired. Our Strip Heaters feature a high temperature metal sheath and high grade mica insulation resistant to moisture and high temperatures. DT Heaters & Controls offer many types of strip and platen heaters for your specific heating requirements.

 

 

Finned Strip Heaters are manufactures with the same quality and functionality as our traditional Strip Heaters, except that heat-dissipating fins are added to the outer sheath. The fins are specifically made and mechanically attached to provide convection heating in multiple air or gas process heating applications.

Free Redbox video rental with every RFQ through the fourth of July!

Performance Ratings
Electrical Ratings
Physical Size Construction Limitations
Maximum Temperature
Up to 1200°F (649°C)
Maximum or Standard Voltage:
120 or 240 volts
For all other voltages contact us
Minimum Bending Radius:
3 times the sheath diameter
Nominal Watt Density:
30 Watts
Maximum Amperage
6 Amps
Coil Diameter Tolerance
±0.005
Maximum Watt Density
75 Watts
Resistance Tolerance:
+10% -5%
Minimum Inside Diameter
From 3/8” (9.525mm) up to 2 ½” (63.5mm)
Wattage Tolerance:
+5% -10%
Coil Length
Up to 18” (457.2mm)
Coil Length Tolerance
2%

Mica Strip Heaters are functional, powerful, and cost-effective. They are of the similar construction as the Mica Band Heater, but in a flat design. These Strip Heaters may be used single or in groups to provide the required amount of heat. Mica Strip Heaters can be customized in a wide range of sizes and configurations, including those requiring cut outs holes and notches.

 

TABLE SPACE

Mineral Insulated Strip Heaters –

This type of strip heater is a thin, responsive heater that provides high temperature, intense watt densities, and prompt response. Applications that require temperatures up to 1400*F could be a good candidate for Mineral Insulated Strip Heaters.

 

TABLE SPACE